~~NOTOC~~
======  Minute of meeting on 2019.04.24 ======
----

===== 1.  Attendees  =====

  * Alexander Harding (SEAKR) \\
  * Alexander Pawlitzki (Thales-Alenia Space, Germany) \\
  * Austin Lesea (Lockheed Martin) \\
  * Christian M. Fuchs (Leiden University, Netherlands & ESA-NPI) \\
  * Cody Dinkins (Harris) \\
  * David Lee (Sandia Labs) \\
  * Gary Swift (meeting moderator, Swift ERS) \\
  * Joe Petrone (Harris) \\
  * Peter Parsons (SEAKR) \\
  * Ron Smith (Northrop Grumman) \\
  * Sebastian Garcia (Slabs) \\
  * Stephen Thomas (Boeing) \\
  * (3) unidentified call-in users \\

   

===== 2.  Topics covered =====

//NOTE: The following are very brief descriptions. Being this a Wiki, please complete/expand/correct them if you think we are missing interesting information (especially regarding anything important for future reference). 
//
//Paragraphs below are comments made by Gary (unless otherwise indicated).//


XQRKU060 preliminary datasheet available on the Space Lounge, as Minal recently announced.

KU060 DUT board: A preliminary schematic capture is available for review, from Boeing. 

SEAKR has recently tested at TAMU (40 hours on Easter weekend): MGTs of KU060.

Boeing to test MGTs using VC108 (Virtex UltraScale) eval. boards, soon. Waiting for Greg's (JPL) reply regarding DUT thinning.

Raytheon coming back to UCD in May, then to TAMU, to test their V7 MGT mitigation scheme.

Joe mentions that, from the six 7-series boards left "blinking LEDs" (microlatchup research done by Harris on 2015/2016), three were accidentally disconnected, but the remaining three are still working.  
   

